Roll of stainless steel wire mesh packing

Stainless steel wire mesh Products are packed in roll pattern generally, then what’s the roll of stainless steel wire mesh packing process?

The stainless steel wire mesh will be rolled on the hard aluminium pipe wrapped with smooth paper after checking and confirming that thereare no defective places. In the process of winding, the two sides of the net must be overlapped, it should be not exceeding 5 mm. At the same time, the roll of stainless steel wire mesh must be rolled tight and rolled several times. After the roll of stainless steel wire mesh was packed well, there must be some air traffic control at both ends of the tube, about 15 centimeters. The ends of the pipes with stainless steel wire gauze rolled up should be tied tightly with soft wire or string. After rewinding, the roll of stainless steel wire mesh should be wrapped tightly in a strong net, and then wrapped on a layer of moisture proof paper outside. Finally, the stainless steel wire mesh should be made of 304 or 316 words to mention the material brand with the corresponding number and specifications.

Roll of stainless steel wire mesh packing not only could save the packing cost and weight, but also could protect the goods well. It’s a good packing option to us.  

Mobile/What’sapp:+8618032401309                    Email:Jenny@qunkunmetal.com